Report by Deden Supriyatman, Chairman of Organizing Committee of Indocoating & Corrosion Summit 2008
Opening Ceremony & Ministerial Address :  DR. Ir. Budi Darmadi, M.Sc Director General for Transportation Equipment and Telematics Industry, Ministry of Industry

Keynote I : “Accelerating Indonesia’s Professional Development Through NACE International Training in Corrosion Mitigation : Challenges & Opportunities” by Robert W. Herbert, President NACE International 2008 – 2009, USA

Keynote II : “Coating Regulations in Oil & Gas Industries” by Dr. Ing Evita H. Legowo, Director General of Oil & Gas*

Keynote III : "Inspire and be Inspired - Resolving Conflicts in the Coatings Industry" by William L. Shoup, Executive Director of SSPC The Society for Protective Coatings, USA

Keynote IV : “Effect of Inhibition on Preferential Corrosion of Weldment in Sweet Gas Gathering Line“ by Dr. Yasuyoshi Tomoe, Corrosion Specialist Teikoku Oil / INPEX / NACE Tokyo, Japan

Keynote V : “Qualification of Composite Systems for The Repair of Pipelines and Risers“ by Dr. Yves Gunaltun, Corrosion Expert, TOTAL France, Secondee at PTTEP Thailand

Panel Discussion I : “Challenges and Opportunity in Corrosion Management and Policy”
Moderator :
Panelists :

1. Robert W. Herbert, President NACE International 2008 – 2009, USA
2. William L. Shoup, Executive Director of SSPC the Society for Protective Coatings, USA
3. Prof. Hendrawan Supratikno PhD, Board of Advisors of The Ary Suta Center, Indonesia

Technical Session I : “Update on Corrosion Monitoring and Controls”
Session Chairman : Deden Supriyatman, Head of Department AFE Coordination, TOTAL E&P Indonesie
Speakers :
1.1.  Dr. Gde Pradnyana, Technical Expert to Chairman, Executive Agency for Upstream Oil & Gas Business (BPMIGAS), Indonesia
1.2.  Bob Phang, Regional Director of NACE International East Asia / Pacific Rim, Malaysia
1.3.  Kenneth Noeranger Olsen, Asia Pacific Regional Marketing Manager, Hempel, Singapore – “Advancement in Zinc
        Rich Epoxy Primers for Corrosion Protection”
1.4.  Sofyan Pahlevi, TOTAL E&P Indonesie - “Cathodic Protection in Large Complex Structur : Case Stories”

Technical Session II : Corrosion Mitigation : “From R&D, Design, Material Selection to Construction – An Integrity Approach”
Session Chairman : Sjarief S. Kusumanegara, Corrosion Engineering Group Lead, PT. Medco E&P Indonesia
Speakers :

1. Theo M. Samosir, Head of Integrity Dept, TOTAL E&P Indonesie - “Pipeline Integrity Management in Mahakam Delta”
2. Dr. Bryan Shedden, Sr. Research Scientist, BlueScope Steel Research - “Corrosion Performance of 55% Al-Zn Coated Steel”
3. Hrakesh Mehta, President Director, Polyline Elastomer Asia – “Corrosion Protection of Plant & Equipments by Polymeric”

Keynote VI : “ The Role of Government Proposed Policy in Mitigation of Corrosion”  by DR. Atte Sugandi MM, Member, House Speakers Representative of Republic of Indonesia

Keynote VII  : “Polyurethane Plural Component Liquid Systems for Insitu Pipeline Rehabilitation” by Christopher P. Dorsey, Senior Manager, UK, Middle East Far East & Asia, TIB-Chemicals AG, Germany

Keynote VIII : “Cost of Corrosion - Degenerative Effects in India” by Tushar Jhaveri, Regional Director of NACE International (East Asia & Pacific Region)

Keynote IX : “How We Can Estimate the Costs of Corrosion within An Industry Sector?”  by Michael Boardman, President – 2008 of Australasian Corrosion Association Inc. (ACA)

Panel Discussion ll : “Competency & Specification Detailing Application Issues in Protective Coatings”
Moderator : Dr. M. Dass, NACE Certified, PT Hempel Indonesia
Panelists :

1. Abdul Rashid, Mc.Dermott,  Indonesia
2. Prakash, Nippon Steel Batam, Indonesia
3. Ahmad Hafidz Saubari, GM Quality Assurance, KHI Pipe Indonesia – “Performance of KHI for Supplying 121 KM Coated Pipes for Onshore Pipeline”
4. Anjar Niryawan, Associate Principle Inspector, PT. Surveyor Indonesia – “Asset Integrity Optimization through Corrosion Based Risk Management

Technical Session III : “Corrosion Risk Based Inspection Management and Controls”
Session Chairman : Zakianto Qohar, QA / QC Group Lead, PT. Medco E&P Indonesia
Speakers :
3.1. Hanung Andriyanto, Inspection Sec./Technical Department, PT. Badak NGL, Indonesia – “CIPS & DCVG Application to Detect Coating Defect on The Buried Pipe”
3.2.  Abdul Quim Bani, Lead Coating/Insulation, Bohai Phase II Development, ConocoPhillips
3.3. Rian Ashari, Corrosion Engineering, TOTAL E&P Indonesie – “Coating Maintenance Strategy in a Marine Environment”

Technical Session IV : “Cathodic Protection Maintenance and Monitoring”
Session Chairman :  Ir. Budi Susilowati Soedarsono, Trisakti University, Indonesia
Speakers :
4.1.  Gerry Williams, Vice President – International Project,  Corrpro Companies Inc. -  “ Mitigation of AC Induced Voltage on Buried Metallic Pipelines”
4.2.  Mark Edgar Lewis, CEO, PT. MPE DEEPWATER, Batam - “Improvement in Offshore Cathodic Protection Retrofits”
4.3.  Lambert H. Prust, Director, Imbema Pacific Indonesia - “Corrosion Management For Steel Jetty Piles”

Technical Session V : “High Performance Coatings and Their Stringent Requirements”
Session Chairman : Ir. Ignatius Yoyok, Country Technical Manager, PPG Industries
Speakers :

1. JF Doddema, Vice President, STOPAQ Europe B.V., The Netherlands - “STOPAQ  Pipeline Coating Systems Have Both Elastic and Viscous Properties – A New Innovative Technology for Rehabilitation and New Construction”
2. Shabbir Munaverali,  QA / QC Manager, McDermott Indonesia - “The Role of SSPC Certified Painting Contractor”
3. Prof. Robert J. Stango, Ph.D., P.E., Professor of Mechanical Engineering  Marquette University USA (Beltcare) - “Development of Bristle Blasting Process for Corrosion Removal and Generating Anchor Profile”